The dynamic routing feature of the router can be used to allow the router to automatically adjust to physical changes in the network's layout. The router uses the dynamic RIP protocol. It determines the route that the network packets take based on the fewest number of hops between the source and the destination. The RIP protocol regularly broadcasts routing information to other routers on the network.

View current routing table:

1. Click on the Show Routing Table button.
2. You can see all of the valid dynamic route entries in use.

Set Up Dynamic Routing:

1. Choose the working mode. Gateway mode should be used if your Linksys router is hosting your network's connection to the Internet. Router mode should be selected if the router exists on a network with other routers, including a seperate network gateway that handles the Internet connection.
2. Choose the protocol you want the router to use to Transmit data on the network.
3. Choose the protocol you want the router to use to Receive data from the network.
4. Click the Apply button to save your changes.